Over-winding a clock is impossible unless the clock is an antique from the 1600s to 1700s, when the mechanics of the clock were weight-oriented and the pulleys and ropes within would go tangled together. Fifty-fifty though clock owners still use the term "overwound," the problem is more likely that the clock requires a skillful cleaning and a few basic adjustments. A mechanically-driven clock wears down from 24-hour interval-to-day running, producing minuscule metallic filings in the gears. Eventually, the coils and springs begin to stick.

  • Over-winding a clock is incommunicable unless the clock is an antique from the 1600s to 1700s, when the mechanics of the clock were weight-oriented and the pulleys and ropes inside would get tangled together.
  • Even though clock owners still use the term "overwound," the trouble is more likely that the clock requires a proficient cleaning and a few basic adjustments.

Remove the pendulum if the clock has one before moving it from the wall or shelf. Leaving the pendulum fastened while transporting the clock, even over a brusque distance, can result in having to supervene upon the suspension spring.

Unfasten the clock hands by holding the infinitesimal hand and turning the nut to the left. Both hands will at present be removable.

Remove the screws that concord the movement housing in place. These are usually located toward the forepart or back of the clock case. Clips may also exist nowadays so unfasten those, likewise, taking care non to suspension the clips.

Open up the movement case and under a bright lamp light and with the assist of a magnifying glass audit the gears, cogs and springs for dust, clay and dark oil build upward. Oil, similar in any mechanical device, becomes old, dry and muddy and needs to exist removed and replaced. Gently clean and wipe abroad any droppings using toothpicks or a make clean, lint-free cotton material.

  • Remove the screws that hold the movement housing in place.
  • Open the motility case and under a brilliant lamp low-cal and with the aid of a magnifying glass inspect the gears, cogs and springs for grit, dirt and dark oil build up.

Spray any areas with signs of lint or grit with a tin can of compressed air. Utilize only short bursts as longer bursts focus air on one area for too long, increasing the risk of excess wet forming. To consummate the cleaning procedure, apply small amounts of clock cleaning fluid with a bristle castor in places where you find heavier deposits of quondam oil. You can purchase clock cleaning fluid at virtually jewelery stores.

Use new clock oil to the gears 1 drop at a fourth dimension so as not to over lubricate any areas. Carefully replace the housing into the body of the clock, endmost the back and reattaching the hands to the face. Apply a small drop of oil on the nut property the hands to keep them from sticking.

If the clock's gear box gets damp, identify it on a sunny window sill or desktop for 15 to 30 minutes to allow it dry. If the clock is not working after cleaning, have a professional person clock repair person check information technology for worn or broken parts.

Be cautious of repair people who believe an ultrasonic cleaning will do a proper job. This will just make clean the large pieces of the clock thoroughly. A full removal of the mechanical parts for cleaning volition be needed.